Hydraulic Pump Repair
Your Pump
Goes Down,
We Come To You
30 years rebuilding hydraulic pumps, motors, and cylinders for the Colorado Front Range. No-nonsense diagnostics. Solid rebuilds. Back to work fast.
30
Years in service
24hr
Emergency response
All major
brands
Serviced &
Rebuilt
Why it matters
Every hour down costs you money
When a hydraulic pump fails on a job site, in a plant, or on a piece of heavy equipment — you don’t need a lecture. You need it fixed right and fast.
That’s exactly what we do. We’ve been running this shop for three decades, and we built our reputation one rebuild at a time. We’ve seen every failure mode in the book — worn barrel plates, blown seals, contaminated fluid, heat damage, cavitation erosion — and we know how to diagnose the real problem, not just swap the obvious part.
Most shops send your pump to a warehouse and you wait a week. We tear it down in-house, give you a straight answer on what it needs, and get it back to you running right. That’s the difference between a service shop and a shipping middleman.
We work on everything from small log splitter pumps to heavy industrial gear pumps running crane systems, presses, and mining equipment. If it moves fluid under pressure, we can rebuild it.
What we repair
Full-scope hydraulic pump service
Piston Pumps
Axial & radial piston pump rebuilds. Barrel, pistons, valve plate inspection and replacement.
Hydraulic Motors
Complete motor rebuilds. Orbital, gear, and piston-type motors serviced.
Hydraulic Cylinders
Rod, seal, and barrel service. Honing, chrome, and complete remanufacture.
Contamination Analysis
Fluid sampling and particle count testing to identify root cause before the next failure.
Hydraulic Cylinders
Rod, seal, and barrel service. Honing, chrome, and complete remanufacture.
Vane Pumps
Rotor, vane, and ring replacement. Flow and pressure performance testing after rebuild.
Brands we service
Bosch Rexroth
Parker
Danfoss
Kawasaki
Sauer-Danfoss
Linde
Eaton Vickers
Sundstrand
Poclain
Yuken
Nachi
Hawe
+ Many more
Who we work with
We service the industries that keep Colorado running
If your operation depends on hydraulic power, we’ve probably worked on something like yours.
Over 30 years we’ve worked alongside construction contractors, crane operators, agricultural outfits, mining operations, oil & gas service companies, manufacturing plants, municipalities, and equipment rental houses across the Denver metro, the Front Range, and beyond. We understand that downtime isn’t an abstract concept — it’s lost revenue, missed deadlines, and frustrated crews. That’s why we move with urgency and communicate clearly from the first call to final pickup.
We also offer field service for situations where pulling the unit isn’t practical. Give us a call and we’ll figure out the fastest path to getting you back online.
Our process
How a rebuild actually works
We don’t believe in mystery. Here’s what happens from the moment your pump arrives at the shop:
1
Teardown & inspection
We disassemble your pump completely — not just the obvious failure point. Every component gets measured and compared against spec. Nothing gets missed because we got in a hurry.
2
Straight-talk diagnosis
We call you with what we found and what it needs. We’ll tell you if it makes sense to rebuild or if replacement is the smarter move. No upsell — just the honest answer.
3
Precision rebuild
We use OEM-quality parts and hold tight tolerances. Bearings, seals, wear surfaces — rebuilt to factory spec or better. Thirty years of doing this means we don’t take shortcuts.
4
Test under load
Every pump is tested on our test stand before it leaves the shop. We verify pressure, flow, and efficiency — and we don’t ship it until the numbers are right.
5
Back in service
You get your pump back with documentation on what was done, parts used, and test results. No surprises, no mysteries.
Warranty on every rebuild
We stand behind our work. All rebuilds come with a written warranty — because if it’s done right, that shouldn’t be a problem.
Just 15 Minutes North of Denver
15 minutes north of Denver on Hwy 85 just north of Brighton. A premium industrial hydraulics maintenance shop with full machining capabilities testing facility We can provide detailed reports with recommendations for preventive maintenance.
Ready to talk?
Call us first — save time.
We pick up the phone. Tell us what you’ve got and we’ll give you a straight answer on turnaround and cost — usually in one conversation.
(303) 659-0920
Request a quote ↗
Serving Denver · Aurora · Lakewood · Englewood · Littleton · Thornton · Westminster · Broomfield · Boulder · Longmont · Fort Collins · Colorado